The Classic Opel Forums - View Single Post - PCV Vent Connections for Fuel Injected system.

houserc · 07-28-2003

I've seen a couple of threads through here concerning the routing of the two vent holes in the valve over of a 1.9 engine. I also saw the write ups on how plugging those holes will cause oil leakage.

Here's my situation. The PO installed a 2.0 fuel injection system on a bored out 1.9 to 2.0. In the process, he routed the smaller hole to the manifold (I'm not with the car now, so I'm not sure where). The larger hole was plugged.

I have also seen pictures in other locations of the larger hole being plugged on injected cars.

Does anybody have a diagram, or pictures, or descriptions of where the crankcase ventilation lines should run for a F.I. engine.

Thanks,
Chris

07-28-2003	#1 (permalink)
houserc 70's Opeler, back 4 more! Join Date: Apr 2003 Location: Shawnee, KS (Kansas City Area) Posts: 409	Valve holes for Fuel Injected system. I've seen a couple of threads through here concerning the routing of the two vent holes in the valve over of a 1.9 engine. I also saw the write ups on how plugging those holes will cause oil leakage. Here's my situation. The PO installed a 2.0 fuel injection system on a bored out 1.9 to 2.0. In the process, he routed the smaller hole to the manifold (I'm not with the car now, so I'm not sure where). The larger hole was plugged. I have also seen pictures in other locations of the larger hole being plugged on injected cars. Does anybody have a diagram, or pictures, or descriptions of where the crankcase ventilation lines should run for a F.I. engine. Thanks, Chris