Originally Posted by namba209
There will also be an odd wire or two that has to be disconnected. For the dash, 2 screws by each door jam and 6-7 at the base of the windshield. I would suggest using an Exacto knife, carefully feel for the depressions where the screws are in the dash at the windshild and make a small "X" over each screw head, that will allow a #1 stubby Phillips screwdriver or a flex drive to access the screws. You can get dimpled washers to put on the screws to cover the cuts in your dash cover. .
|
Quick note: odd wires might include those to AMP meter? then a bunch of bundles off the fuse box?
The door jam screws on either side of the dash cover appear to have been covered over since cover was done with dash off then put back every screw that is covered, isn't there, follow me? the lower left passenger one, behind the plug by the heater controls; not there, both sets as above, not there, I've managed to find a few that are along windshield. In short, there ain't much holding this dash on........