|
Heres how I would handle this problem.
Take all your parts to a good machine shop and have them inspect and advise.
If they pass the visual, hot tank the parts get them real clean.
If they don't pass they might want to pull out the mics and measure then advise.
Next step assy. rods and main caps torque then measure and you guessed it advise.
What kind of condition is the crank in any way?
I've got the specs for the rods and mains at the shop but not at home.
Second thought any good machine shop WILL have the specs!!!!!
__________________
Tinkering is my name..fun is the game
Last edited by wrench459; 09-30-2007 at 09:38 PM.
|