Originally Posted by namba209
Mike, if your door locks and ignition switch use the same key, you could pull one door handle with lock and take it to a locksmith and mayhap they can cut some new ones from the door lock cylinder. The gas cap is a whole different ball of wax though. A master locksmith can make a key for that by judicious hand filing a key blank. But it may be costly.
|
A key cut by impression from the door handle will not turn the ignition lock because the ignition locks has more pins than the door lock. When you get it where you are going with it, take the door panel off and take the door handle off the door, there should be a key code on the inside lock part of the handle, a locksmith can cut a key from that provided he has a proper blank.