Originally Posted by Tru-Craft
I was reading Markandsons thread about FI for our Opels.
He mentions an o2 sensor or Air/Fuel Ratio gauge.
He told me to look at the site below.
I want to use the o2 sensor as a tuning aid for my carburetor (Weber38) on my GT and Triumph TR3 and other carbed things I have.
I don't want to mount it as a permanent install.
I want to drill and weld a fitting on the header pipe.
Install o2 sensor.
Tune.
Plug hole and remove setup.
Don't need a computer output, just a gauge to show A/F ratio.
Innovate Standalone Gauge Kit w\ LC-1 & Red DB Digital Gauge DIYAutoTune.com
Tuning With Innovate - FordMuscle.com
Would be a great way to get an accurate carb adjustment.
Any thoughts?
Lyle
|
If you arent going to keep the gauge installed permanently then just use a voltmeter instead to tune. IOW dont install an AFR gauge, just use your regular voltmeter set to the millivolt scale, tune and dissconnect. All the AFR is anyway is a limited range millivolt meter.