|
Namba it also appears that something is bent cause I put it together everyway I could and still can't make it work right. I am thinking that the piece that is now held on with the machine screw is slighty bent. There just isn't enough space to move the shifter over to the locking block. If the bend was less it would work fine. I was hoping that someone would chime in with a picture of what it should look like. I also plan on replacing that pin the machine screw won't last for long. BQS4 was right though it only takes about 10 minutes to remove and replace it. So far I have removed and replaced the part about 10 times though. Thanks for the info.
|