|
If you build custom stands like the ones I did I would recommend making the pins long enough to go through the jack points and then drilling a hole in the pin on the far side of the jackpoint and putting a spring clip or some other retaining device through the pin so that it can not pull out. I found with mine that the body was so light it sometimes sat on only three stands and with no pressure on the 4th one it became a little hairy.
__________________
Jeff
'73 GT,5spd,Recaro,EDIS4 2.2 EFI by MegaSquirt, Ali Flywheel w/S10 Clutch, Electric Fan, Roller Rockers, Venolia Pistons, 6 Cyl Intake w/ Custom Injection, 15" Wheels,Lecarra,F&R Sway Bars,Custom Exhaust,1" Sport Spring,Koni Reds,Big Brakes,3 Core Ali Radiator,Hse of Colors Kandy Pagan Gold.
 123 WHP @ 6800 RPM
'64 VW Karmann Ghia
'08 BMW M3
|