Originally Posted by tekenaar
. . . that is my engine "pre-luber/oiler" that I fabricated specifically for oiling the engine before first firing it up! It's put in where the dizzy goes and the drill drives the shaft turning the oil pump . . . everything is primed and oiled that way! I do this on every build/rebuild . . . that engine is my 1.9 sprint engine, BTW!
|
Did you make it from an old shaft or did you make the front end your self?
I have a shaft that can't be used because the cogwheel [?tandwiel] is bad, this would be a nice piece of equipment to have in my special Opel-tool toolbox
