Originally Posted by tekenaar
. . . that is my engine "pre-luber/oiler" that I fabricated specifically for oiling the engine before first firing it up! It's put in where the dizzy goes and the drill drives the shaft turning the oil pump . . . everything is primed and oiled that way! I do this on every build/rebuild . . . that engine is my 1.9 sprint engine, BTW!
|
Nice to have the facility to custom make one, and it looks good, but a long shank flat blade screwdriver will do in a pinch by just removing the handle. Chuck it up in your drill and remember to turn it counter-clockwise. You will know when the pump picks up prime, the drill will slow down and the rocker studs will ooze oil into the rocker arm.