View Single Post
Old 07-10-2009   #9 (permalink)
bigjim5551212
Weber Carburetor Guru
 
Join Date: Jan 2008
Location: Vancouver Canada
Posts: 129
bigjim5551212 is on a distinguished road
well. here is my 2 bits worth.

this is a great carburetor. It has some drawbacks

one problem with this carburetor is that it is about an inch taller than a DGAV series carburetor.

they have a starter device similar to the DCOE

The big issue is jet changes. the main jets come out of the side of the carburetor, so you have to pinch off the fuel hose and run the engine so it empties the carb, or you have gas running all over the place.

next, air corrector jets. Not common, however the main jets fit. the emulsion tubes are hard to get.

some carbs have no vacuum advance port.
bigjim5551212 is offline   Reply With Quote Top home