|
The new fuel rail I made is made from 3/4" DOM steel tubing. I brazed pieces of flared 5/16" tubing that I cut from the stock fuel rail...these fit into the hose ends of the injectors. Yet to be welded onto the fuel rail in these photos are the AN fittings at the ends for the fuel line inlet and the Aeromotive adjustable pressure regulator.
The injectors are blue Bosch '036' injectors, which flow around 380 cc's at 44 psi. More than enough for the horsepower goals of this engine.
__________________
My Flickr photos.
Jan. 3, 1984 - Jan. 3, 2009, that's 25 years of this damn Opelitis!
C.R.L. 9/22/69 - 12/8/99, J.M.L. 3/3/43 - 6/15/04
|