Glove Box installation?

Kendall · 01-05-2008

Hi

I was looking through forums and I couldn't find any information on installing the glove box. How do I install the glovebox?

Thanks
Kendall

ungermm · 01-05-2008

The good news is that the glove box is attached by only 3 screws. The bad news is you need to have the dash out first. Sorry, Jerry

jvandyke · 01-05-2008

Mine was out, I had to pull the dash for the heater controls and all things heater/blower related so then I put the "box" back in and thought I had reinforced it sufficiently but it is loose in there again now. Someone once mentioned making a removable drop in bag/pouch which sounds like a good idea as you could lift it out and have some access back in there if needed.
Pulling the dash is a pain!

01-05-2008	#1 (permalink)
Kendall Opeler Join Date: Apr 2005 Location: Monroe CT Posts: 23	Unanswered: Glove Box installation? Hi I was looking through forums and I couldn't find any information on installing the glove box. How do I install the glovebox? Thanks Kendall

01-05-2008	#3 (permalink)
jvandyke Opeler Join Date: May 2006 Location: Hudsonville, Michigan, USA Posts: 1,794	Mine was out, I had to pull the dash for the heater controls and all things heater/blower related so then I put the "box" back in and thought I had reinforced it sufficiently but it is loose in there again now. Someone once mentioned making a removable drop in bag/pouch which sounds like a good idea as you could lift it out and have some access back in there if needed. Pulling the dash is a pain! __________________ "Being ignorant is not so much a shame, as being unwilling to learn." Benjamin Franklin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-05-2008	#2 (permalink)
ungermm UngerDog Join Date: May 2004 Location: Pleasanton, CA Posts: 767 Provided Answers: 5	The good news is that the glove box is attached by only 3 screws. The bad news is you need to have the dash out first. Sorry, Jerry

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)