Opel Forums - View Single Post

neuropel · 10-11-2004

Thanks for posting that Bob!

Is the port job for this head something a typical speed shop could do (i.e. are there tricks here that a non-Opel shop would have trouble with or potentially ruin a head)? Is this head set up for the 1.94" intake/1.60" exhaust valves?

Anyone else out there looking to use the roller rockers on a 2.4 head that can chime in?

Todd K.

10-11-2004	#2 (permalink)
neuropel Rice Cooker Join Date: May 2002 Location: Spring Church, PA Posts: 1,469 Classified Rating: 0% (0)	Thanks for posting that Bob! Is the port job for this head something a typical speed shop could do (i.e. are there tricks here that a non-Opel shop would have trouble with or potentially ruin a head)? Is this head set up for the 1.94" intake/1.60" exhaust valves? Anyone else out there looking to use the roller rockers on a 2.4 head that can chime in? Todd K.