|
The 2.0 FI is kind of easy to setup since OGTS sell the stuff for it
but once you see it you will say i could of did this
the 1.9 is a pain (it has such a large range of motion) unless you have the 75 valve cover
if you don't have the 75 valve cover you will need a bracket at about the same location (the passenger side of the valve cover)
its hard to describe
sounds like your right on with the fuel pump i mounted mine at the rear of the car
The stock 75 fuel pump was right near the left rear tire
(i know not the best setup but it worked)
i used the 75 pump and the stock 75 FI pump bracket (I'm cheap)
you could use whatever FI pump you like just make sure you check the pressure, once you have verified the pressure is good under different driving conditions then you can take the high pressure gage off
i had a gage tie warped outside the windshield for awhile
for those wondering i hardly noticed any difference between the 1.9 and the 2.0 FI setup (TB's are the same size)
HTH
Davegt74
|