|
I basically finished porting, I ended up with about a full soda can of filings (they are sharp no matter how you look at them) I opened up all of the intake/exhaust manifold bolt holes through the sides and they will be welded solid. I ported through the welded area in one spot so that will get touched up. when ever welding is done it is bolted to a jig to prevent warping becuase I really don't want the runners to get warped, the area where the carb mounts to will need to get machined already becuase it did warp. Also, how high should the center divider be? and when it is finished will the carburator (32/36) need to be rejetted or what kind of adjustments will be needed?
|