Originally Posted by asdasc
One example is that I have seen reference many times to an article by RallyBob on building a 2.0L using 265 pistons. I have read a ton of info on the forum about this, but have still never seen the original article written by Bob that everyone keeps referencing.
|
I'll save you the time, I never wrote such an article! I did write a 1.9>to>2.4 conversion article however, so perhaps this is the article people are thinking of.
I've made brief mention of the 265 pistons for a 2.0 since it's been done since the late '70's. That was primarily with the TRW forgings (N.L.A.), and later the Venolia copies of those pistons. I have never built a 2.0 from cast aluminum 265 pistons, so I don't know the outcome of using those. HTH.