Aluminum Flywheel Group buy

[Gary]

I will contact the company once we have a confirmed number to get the final price. At that point I will either email the company contact info to you or, if I get their okay, post it here.

At that point, you will contact the company for payment and shipping info so there won't be any 'middleman' to confuse things.

[Yellow73GT]

OK, just waiting to hear back from P.J. Romano on the pivot stud, but as it stands I am saying count me in, one way or another I will figure out the pivot stud thing.

[wrench459]

I'm in confirmed.

[PROPEL]

I'm confirmed, Gary. Thanks for putting this together.

[kwschumm]

Here's the list so far:

1. Rauchen GT
2. AV8R
3. JimFrank
4. PROPEL
5.wrench459
6.kwschumm
7. crliwa
8. jerrygrogan
9.Team Unter Puff
10. PMH

?-Yellow73GT
?-crliwa (2nd one)

We are close to the $315 price break. I'll contact the company once all above confirm.

kwschumm confirmed!

[PMH]

PMH confirmed. Thanks Gary for heading this up! If anyone has one of the longer pivot studs please let me know!

[Rauchen GT]

Rauchen GT confirmed.

[Gary]

Update:

We are dealing with the manufacturer not a retailer so in order to get the $315 price we will need one payment and all be shipped to one location.

I'm waiting for the shipping charges from CA to me. For shipping to you, go to UPS.com and cost out a 10 lb. pizza sized box from 02777 to you.

[Team Unter Puff]

USPS flat rate box 12"x12"x5.5" $14.65

These should fit within this box, correct?

[Gary]

Shipping 10 flywheels to me will cost $135.00. So adding $13.50 to the 10 pc. cost brings it to $328.50ea plus shipping to you.

The box is 14 x 14 x 2 and weighs approx. 10 lbs.

We will go forward once we have 10 confirmed at this price.

[jerrygrogan]

Jerry Grogan Confirmed. Also I will pay a little extra for the handling of all the fus. I also have my own UPS account for shipping to me and can issue a pickup.

thanks for your hard work.

[wrench459]

10-4 I'm still a go.

[Gary]

8 people committed to buy @ $328.50 + actual shipping to you.

1. Rauchen GT
2. PROPEL
3. wrench459
4. kwschumm
5. jerrygrogan
6. Team Unter Puff
7. PMH
8. crliwa

Waiting to hear from:
AV8R
JimFrank
Yellow73GT
crliwa (2nd one)

I'll send out payment info and get a delivery estimate once we hit 10.

[Yellow73GT]

Count me in (confirm)

[booeman]

I still have one ball stud left from the four pieces I made three years ago. Nitro Mike and Tru Craft bought one each and I kept one. I make them out of 12mm X 1.5mm X 70mm Mercedes hub centric lug bolts and I grind a .06" wide flat blade screw driver slot in each end. I'll have to check but I think the radius is an 18mm ball. End to end they are 3.125" long w/ 2.125" of thread. If there's enough interest I'll get things moving in the next few days.

[PROPEL]

I still have one ball stud left from the four pieces I made three years ago. Nitro Mike and Tru Craft bought one each and I kept one. I make them out of 12mm X 1.5mm X 70mm Mercedes hub centric lug bolts and I grind a .06" wide flat blade screw driver slot in each end. I'll have to check but I think the radius is an 18mm ball. End to end they are 3.125" long w/ 2.125" of thread. If there's enough interest I'll get things moving in the next few days.

I'd take one of these ball studs, Booeman. Thanks.

[Rauchen GT]

I'm in for one of the pivot studs as well. If I'm going to do the S-10 conversion and the aluminum flywheel, might as well do it correctly with the extended pivot stud. If you need cash up front PM me and we can arrange.

Thanks!
Brian

[Gary]

9 people committed to buy @ $328.50 + actual shipping to you.

1. Rauchen GT
2. PROPEL
3. wrench459
4. kwschumm
5. jerrygrogan
6. Team Unter Puff
7. PMH
8. crliwa
9. Yellow73GT
Waiting to hear from:
AV8R
JimFrank
crliwa (2nd one)

I'll send out payment info and get a delivery estimate once we hit 10.

[SpringGT]

Gary, put me down for one as well.
Bob

[Team Unter Puff]

Bump

That sounds like 10. Anybody heard anything?