S-10 clutch in a Getrag Pic neded

opelwasp · 04-11-2006

I need the pic of the place to grind my bell housin in my Getrag 240 to accomodate my S-10 clutch. the one listed on classicopels@yahoo no longer works.

markandson · 04-11-2006

I don't know if it is because I ground my flywheel thinner than most people, but my clutch does not hit the 5 speed housing. I am using a LUK clutch.

bendele · 04-11-2006

Chris,

http://www.opelgt.com/forums/clutch-...t=manta+getrag

Try out this thread, I was just checking it out myself.
Pretty good explaination and pictures of installing the getrag 240. It's for an ascona but the pictures are still relavent.

After the pictures, RallyBob mentions that the need to grind varies depending upon the clutch.

Chris

opelwasp · 04-11-2006

That was exactly what I was looking for and couldn't find. Thanks a whole bunch.

tekenaar · 04-11-2006

Originally Posted by opelwasp

I need the pic of the place to grind my bell housin in my Getrag 240 to accomidate my S-10 clutch. the one listed on classicopels@yahoo no longer works.

Go here and click on #6. All other Getrag install info's there (been there for years) too . . .

opelwasp · 04-11-2006

Doh! i guess i should have read "click on yellow" to get more info.

04-11-2006	#1 (permalink)
opelwasp Non Civilian Join Date: Mar 2003 Location: Between Chico and Sac, CA Posts: 1,596 Provided Answers: 1	Unanswered: S-10 clutch in a Getrag Pic neded I need the pic of the place to grind my bell housin in my Getrag 240 to accomodate my S-10 clutch. the one listed on classicopels@yahoo no longer works. __________________ Arguing online is the same as racing in the Special Olympics; no matter who wins, you're both still retarded. Last edited by tekenaar; 07-10-2006 at 12:26 PM.

04-11-2006	#3 (permalink)
bendele Opeler Join Date: Jan 2003 Location: Johnstown Co Posts: 62	Try this thread Chris, http://www.opelgt.com/forums/clutch-...t=manta+getrag Try out this thread, I was just checking it out myself. Pretty good explaination and pictures of installing the getrag 240. It's for an ascona but the pictures are still relavent. After the pictures, RallyBob mentions that the need to grind varies depending upon the clutch. Chris

04-11-2006	#4 (permalink)
opelwasp Non Civilian Join Date: Mar 2003 Location: Between Chico and Sac, CA Posts: 1,596 Provided Answers: 1	That was exactly what I was looking for and couldn't find. Thanks a whole bunch. __________________ Arguing online is the same as racing in the Special Olympics; no matter who wins, you're both still retarded.

04-11-2006	#6 (permalink)
opelwasp Non Civilian Join Date: Mar 2003 Location: Between Chico and Sac, CA Posts: 1,596 Provided Answers: 1	Doh! i guess i should have read "click on yellow" to get more info. __________________ Arguing online is the same as racing in the Special Olympics; no matter who wins, you're both still retarded.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)