Early Kadett B dash pad removal

Gordy · 02-15-2009

Checked the forums and the FSM and don't see any info on how to remove the upper dash pad on an early (67 rear leaf springed) Kadett B. This has just the 3 inch pad (front to rear measurement) that runs along the top of the dash board from side to side. There must be some clips or hidden retainers because there are no obvious screws or anything that show on top or from below. Always like to ask before I just dig into it!

heimue · 02-15-2009

The newer one's have nuts on the rear (through the metal dash). I was about to say "they are screwed in from behind" but I want to keep the forum family rated

Dieter

02-15-2009	#1 (permalink)
Gordy Member Join Date: Mar 2002 Location: Loves Park, IL (Rockford area) Posts: 798	Unanswered: Early Kadett B dash pad removal Checked the forums and the FSM and don't see any info on how to remove the upper dash pad on an early (67 rear leaf springed) Kadett B. This has just the 3 inch pad (front to rear measurement) that runs along the top of the dash board from side to side. There must be some clips or hidden retainers because there are no obvious screws or anything that show on top or from below. Always like to ask before I just dig into it!

02-15-2009	#2 (permalink)
heimue "The Jägermeister" Join Date: Nov 2004 Location: Newnan, GA - greater ATL area Posts: 1,509 Provided Answers: 3	The newer one's have nuts on the rear (through the metal dash). I was about to say "they are screwed in from behind" but I want to keep the forum family rated Dieter __________________ One 2.0-16V Opel is not enough

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)