1967.5 Kadett Disc brake Master question

avendlerdp · 07-07-2007

Hello-

Does anyone know the bore size of the master cylinder on a 1967.5 Kadett? It is a disc brake car with a booster. Are there any other M/C's from other car's that fit?

Thanks

-Alex

Killer Texas GT · 07-07-2007

The bore for the master clyinder for the Kadett 'B' is 3/4" for both cars equipped with front drum or disc brakes. The Master cylinder from a later model Kadett or GT will work as a substitute. information from the 66-67 Opel Kadett 'B' service manual.

07-07-2007	#1 (permalink)
avendlerdp Opeler Join Date: Jun 2007 Location: Laurel Canyon Posts: 11	Unanswered: 1967.5 Kadett Disc brake Master question Hello- Does anyone know the bore size of the master cylinder on a 1967.5 Kadett? It is a disc brake car with a booster. Are there any other M/C's from other car's that fit? Thanks -Alex

07-07-2007	#2 (permalink)
Killer Texas GT Senior Contributor Join Date: Jan 2003 Location: Leonard, Texas Posts: 888 Provided Answers: 1	Bore The bore for the master clyinder for the Kadett 'B' is 3/4" for both cars equipped with front drum or disc brakes. The Master cylinder from a later model Kadett or GT will work as a substitute. information from the 66-67 Opel Kadett 'B' service manual. __________________ rk 68 Kadett 2 Dr 1.1 SR/Rallye Suspension 68 Kadett Rallye 1.9/4 Spd & AC 69 GT 1.9/4 Spd 70 GT 1.9/5 Spd,87 Impulse PB/MC/4 wheel 10.5" vented Disc/complete suspension/power assist & tilt wheel steering 71 Kadett 2 Dr 1.1/4 Spd/4 wheel drum brakes(project:to a 1.9 FI/Auto 75 Big Brakes/Impulse vented rr Disc, Factory AC from Buick/Opel by Isuzu 72 GT 1.9 FI/Auto 75 Big Brakes/Impulse vented rr Disc 73 Manta Rallye 75 Ascona 1.9 FI/5 Spd/Impulse rr Disc brakes OPEL WERKS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)