|
08-18-2008
|
#1 (permalink) |
|
Opeler
|
Unanswered: brake booster
ok i just removed the brake booster and i have alot of brake fulid in it i think there should be a seal between the master cyl. and the booster am i right and if so dose anyone have a rebuild kit for both the master and the booster thanks for any help with this
|
|
|
|
08-18-2008
|
#3 (permalink) |
|
Detritus Maximus
|
As I recall, there is a seal/boot or something but if you have fluid in the booster, then the master is leaking (which is a different seal).
The master rebuild kit is available from several places. The booster would need to be sent out for rebuilding. I had Vanco in California do mine and I am very happy with it. Probably about a $125 for that. If your brakes have felt fine and operated okay, the booster probably doesn't need anything. Just make sure the seal at the vacuum fitting is sealing properly. |
|
|
|
|
"No, it's not fiberglass."
"No, the motor is not in the back." "No, your friend in high school did not 'peg' his speedometer." |
 |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
