Brake lines

davegt27 · 06-22-2002

Hi all

My $425 pick and pull special needs some brake lines

do you guys/gals have any suggestions where to get them

thanks in advance

Davegt74

RallyBob · 06-22-2002

Dave, there is a European company (Euroline I recall) who used to make brake line kits for the GT. They're already cut to length and flared correctly, but they still have to be bent to fit. Maybe GT Source can get these, or perhaps you can order them from Suselbeek (sp?) overseas, he took over the Parsget line of products, and I used to get my brake line kits from them. Alternatively, you can bend your own up, and cut and flare the lines to fit. You want to use 3/16" steel lines, with 10 mm x 1.00 pitch threads, and with an inverted flare. In fact I'm bending a set up this afternoon for the rear axle I'm rebuilding/modifying.

Bob

davegt27 · 06-22-2002

thanks Bob for the info

the last time i bought a Brake line for a Gt was some years ago

it was only $10 (each) for some Flexie Line from a import car repair shop

glad to here OGTS is selling brake line now.

David ligon

06-22-2002	#1 (permalink)
davegt27 Certified Opelholic Join Date: May 2002 Location: Aurora, CO Posts: 862 Classified Rating: 100% (1)	Unanswered: Brake lines Hi all My $425 pick and pull special needs some brake lines do you guys/gals have any suggestions where to get them thanks in advance Davegt74

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-22-2002	#2 (permalink)
RallyBob Project 1450 supporter... Join Date: Mar 2002 Location: Pleasant Valley, CT Posts: 6,655 Classified Rating: 0% (0) Provided Answers: 4	Dave, there is a European company (Euroline I recall) who used to make brake line kits for the GT. They're already cut to length and flared correctly, but they still have to be bent to fit. Maybe GT Source can get these, or perhaps you can order them from Suselbeek (sp?) overseas, he took over the Parsget line of products, and I used to get my brake line kits from them. Alternatively, you can bend your own up, and cut and flare the lines to fit. You want to use 3/16" steel lines, with 10 mm x 1.00 pitch threads, and with an inverted flare. In fact I'm bending a set up this afternoon for the rear axle I'm rebuilding/modifying. Bob

06-22-2002	#3 (permalink)
davegt27 Certified Opelholic Join Date: May 2002 Location: Aurora, CO Posts: 862 Classified Rating: 100% (1)	thanks Bob for the info the last time i bought a Brake line for a Gt was some years ago it was only $10 (each) for some Flexie Line from a import car repair shop glad to here OGTS is selling brake line now. David ligon

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)