How to make a 2.4?

joedeats · 07-07-2006

OK im new so forgive me but can you make a 1.9 eingine into a 2.4 but just using a different crank rods and pistons in the same block?

2 Fast 4 U · 07-07-2006

, use the search engine there is a thread bij Rally Bob.
piece of advice

use the search engine first before asking, it's likely been asked before

namba209 · 07-07-2006

O.K. Joe, not wanting to be harsh, but to get you on the right track, I'll ask that you use the seach button on the top menu line, or go to the engine performance forum on the site. I can just about gurarantee you, the answer is there, probably with a lot more info than you want. Before you go off in a huff, let me explain that with over 10 million hits on this site, your question and thousands of other questions have been answered to the point that some members just get tired of answering the same question time after time. I think you'll find that your answer is in either of those areas, and if you don't get the answer you're after by all means ask away, but in the correct forum, please.

opelwasp · 07-07-2006

start here: http://www.opelgt.com/forums/opel-en...2.4+conversion

jeff denton · 07-08-2006

Welcome aboard, Joe. As suggested, study this site's forums, and use the search feature. I think any question you can ponder is answered in there, and any wild new ideas you may have were, surprisingly, already discussed in such incredible detail... believe me, we've seen and heard it all. And are willing to go to similar lengths with the next one!
Personally, the only real irritation to me is when people are worried about what things cost. Everything costs a lot. Especially when they haven't a pot to pee in and have no business starting an expensive new hobby. We can put a 426 Hemi in a GT, no problem, but not for under $100.... A lot of what goes on here is what I call vehicular masturbation, it isn't real, but it's fun fantasy and gets into great humor at times! So please do be patient with our fellow member's occasional sarcasm and humor. None of are here to meet new enemies, just make new friends and keep Opels alive.

kwilford · 07-08-2006

Originally Posted by joedeats

OK im new so forgive me but can you make a 1.9 engine into a 2.4 but just using a different crank rods and pistons in the same block?

Extensively read the Forum for Opel Engine Performance Modifications:
http://www.opelgt.com/forums/opel-en...modifications/
(where this thread might better be placed

) since what you may want may be more readily achieved by other means than simply

making more displacement.

calvin · 07-08-2006

07-07-2006	#1 (permalink)
joedeats Opeler Join Date: Jul 2006 Location: Jacksonville, fl Posts: 14	Unanswered: How to make a 2.4? OK im new so forgive me but can you make a 1.9 eingine into a 2.4 but just using a different crank rods and pistons in the same block?

07-07-2006	#2 (permalink)
2 Fast 4 U Detroit,where my home was Join Date: Oct 2005 Location: Maria - Hoop, The Netherlands Posts: 2,216 Real Name: Erick Provided Answers: 5	use the search engine , use the search engine there is a thread bij Rally Bob. piece of advice use the search engine first before asking, it's likely been asked before __________________ Opel Ascona; driving one is like living on the edge. Only built from 1970 - 1975

07-07-2006	#3 (permalink)
namba209 6,000 Post Club Join Date: Aug 2002 Location: Imperial Beach, CA South of San Diego Posts: 6,054 Provided Answers: 6	O.K. Joe, not wanting to be harsh, but to get you on the right track, I'll ask that you use the seach button on the top menu line, or go to the engine performance forum on the site. I can just about gurarantee you, the answer is there, probably with a lot more info than you want. Before you go off in a huff, let me explain that with over 10 million hits on this site, your question and thousands of other questions have been answered to the point that some members just get tired of answering the same question time after time. I think you'll find that your answer is in either of those areas, and if you don't get the answer you're after by all means ask away, but in the correct forum, please. __________________ Ron 72 GT 3.4L V-6/T-5/ZF posi - almost done - Just need AC installed. 75 Chevy monza 5.7L/TH350/Auburn 3.08 posi - Next

07-07-2006	#4 (permalink)
opelwasp Non Civilian Join Date: Mar 2003 Location: Between Chico and Sac, CA Posts: 1,596 Provided Answers: 1	start here: http://www.opelgt.com/forums/opel-en...2.4+conversion __________________ Arguing online is the same as racing in the Special Olympics; no matter who wins, you're both still retarded.

07-08-2006	#5 (permalink)
jeff denton former opel racer Join Date: Nov 2002 Location: near some glaciers Posts: 2,863 Real Name: Jeff "Oh-Oh" Denton Provided Answers: 4	Welcome aboard, Joe. As suggested, study this site's forums, and use the search feature. I think any question you can ponder is answered in there, and any wild new ideas you may have were, surprisingly, already discussed in such incredible detail... believe me, we've seen and heard it all. And are willing to go to similar lengths with the next one! Personally, the only real irritation to me is when people are worried about what things cost. Everything costs a lot. Especially when they haven't a pot to pee in and have no business starting an expensive new hobby. We can put a 426 Hemi in a GT, no problem, but not for under $100.... A lot of what goes on here is what I call vehicular masturbation, it isn't real, but it's fun fantasy and gets into great humor at times! So please do be patient with our fellow member's occasional sarcasm and humor. None of are here to meet new enemies, just make new friends and keep Opels alive. __________________ No Opels were harmed in the filming of this movie. However two Mustangs, a Pinto, and a Capri were hospitalized. One Mustang was euthanized the next morning.

07-08-2006	#7 (permalink)
calvin Senior Contributor Join Date: Mar 2002 Location: St Louis, Mo Posts: 653	you will love the results.... __________________ http://www.cardomain.com/memberpage/470044

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode