GT carb linkage: Solex or Weber

tekenaar · 02-26-2006

Here's a quick picture of all the basic elements in a stock GT carb linkage used with either stock Solex or replacement Weber DGxV carb:

kent · 02-26-2006

Do you have a pic of were the bushings go I have new ones for each side but the old ones are gone and I'm not sure how there supposed to go

Killer Texas GT · 02-26-2006

here is a picture of where the bushings go

kent · 02-26-2006

thanks hmm would be easier to do with the engine out

asdasc · 02-27-2006

Yeah, I pulled my engine to replace them too!

(just kidding!!)

02-26-2006	#1 (permalink)
tekenaar Cunning Linguist Join Date: Mar 2002 Location: Plano, TX 75074 Posts: 4,440 Real Name: Otto Provided Answers: 13	Unanswered: GT carb linkage: Solex or Weber Here's a quick picture of all the basic elements in a stock GT carb linkage used with either stock Solex or replacement Weber DGxV carb: __________________ 1960: ♥ '61 Rekord PII 1.7 3S 3.9 ♥ '69 Kadett LS 'sprint' 1.9 3A 3.18 1970: ♥ '70 GT 1.9 4S 3.44 ♥ '72 GT 2.2SSD 5S 3.44 ♥ '72 GT 2.4FI 5S 3.44P ♥ '73 GT 1.9FI 4S 3.44 ♥ '75 1900 1.9FI 4S 3.44 1980: ♥ '85 Bitter SC 3.9FI 5S 3.44P 2000: ♥ '09 Solstice GXP Coupe 2.0 SIDI VVT Turbo 5S 3.73P

02-26-2006	#3 (permalink)
Killer Texas GT Senior Contributor Join Date: Jan 2003 Location: Leonard, Texas Posts: 888 Provided Answers: 1	here is a picture of where the bushings go __________________ rk 68 Kadett 2 Dr 1.1 SR/Rallye Suspension 68 Kadett Rallye 1.9/4 Spd & AC 69 GT 1.9/4 Spd 70 GT 1.9/5 Spd,87 Impulse PB/MC/4 wheel 10.5" vented Disc/complete suspension/power assist & tilt wheel steering 71 Kadett 2 Dr 1.1/4 Spd/4 wheel drum brakes(project:to a 1.9 FI/Auto 75 Big Brakes/Impulse vented rr Disc, Factory AC from Buick/Opel by Isuzu 72 GT 1.9 FI/Auto 75 Big Brakes/Impulse vented rr Disc 73 Manta Rallye 75 Ascona 1.9 FI/5 Spd/Impulse rr Disc brakes OPEL WERKS Last edited by Killer Texas GT; 11-04-2006 at 09:19 AM.

02-27-2006	#5 (permalink)
asdasc Senior Contributor Join Date: Oct 2005 Location: Mt. Clemens, Michigan Posts: 888	Yeah, I pulled my engine to replace them too! (just kidding!!) __________________ Steve "ever notice you are never done tinkering with the GT?" Never mind, I am WAAAY beyond tinkering now...[/SIGPIC]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-26-2006	#2 (permalink)
kent Opeler Join Date: Jul 2003 Location: Urbandale Iowa Posts: 196 Provided Answers: 1	Do you have a pic of were the bushings go I have new ones for each side but the old ones are gone and I'm not sure how there supposed to go

02-26-2006	#4 (permalink)
kent Opeler Join Date: Jul 2003 Location: Urbandale Iowa Posts: 196 Provided Answers: 1	thanks hmm would be easier to do with the engine out

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)