unseizing cables?

simplemind7 · 06-22-2005

does anyone have any recommendations on unseizing, or freeing up old cables, like the clutch or headlight cable. i found a nice clutch cable laying around, but all 3 of my headlight cables are jammed

BQS4 · 06-22-2005

Since all the cables are off the car, hang them up by one end, in an area where you can make a mess and not worry too much about it, or hang them over a bucket or pile of rags and shoot penetrating oil in the top end and let them soak through. PB Blaster, WD40, Liquid Wrench, etc, would do the trick, it will just take a little time to let the oil soak through.

simplemind7 · 06-22-2005

alright, thats what i started doing yesterday, just wondering if there was a better way

nobody · 06-22-2005

just an idea.

http://www.partsamerica.com/ProductD...pe=584&ptset=A

and then

http://www.opelgtsource.com/catalog/...words=info.htm

tomcat · 06-22-2005

I have a headlight cable up for bid on ebay right now. 2 days left on bidding. No bids yet. starting bid is 19.99. This cable is working. It has a little stickiness but can be worked out. These cables do go bad so you may consider this one if you can't get them working.

06-22-2005	#1 (permalink)
simplemind7 Opel GT? Who makes that? Join Date: Oct 2004 Location: Ayr, Ontario, Canada Posts: 632 Classified Rating: 0% (0)	unseizing cables? does anyone have any recommendations on unseizing, or freeing up old cables, like the clutch or headlight cable. i found a nice clutch cable laying around, but all 3 of my headlight cables are jammed

06-22-2005	#5 (permalink)
tomcat gogtgo Join Date: Jun 2003 Location: austin tx Posts: 45 Classified Rating: 0% (0)	opel gt headlight cable I have a headlight cable up for bid on ebay right now. 2 days left on bidding. No bids yet. starting bid is 19.99. This cable is working. It has a little stickiness but can be worked out. These cables do go bad so you may consider this one if you can't get them working.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-22-2005	#2 (permalink)
BQS4 Southern Red Neck Join Date: Mar 2002 Location: Snellville, GA Posts: 5,058 Classified Rating: 0% (0)	Since all the cables are off the car, hang them up by one end, in an area where you can make a mess and not worry too much about it, or hang them over a bucket or pile of rags and shoot penetrating oil in the top end and let them soak through. PB Blaster, WD40, Liquid Wrench, etc, would do the trick, it will just take a little time to let the oil soak through.

06-22-2005	#3 (permalink)
simplemind7 Opel GT? Who makes that? Join Date: Oct 2004 Location: Ayr, Ontario, Canada Posts: 632 Classified Rating: 0% (0)	alright, thats what i started doing yesterday, just wondering if there was a better way

06-22-2005	#4 (permalink)
nobody No Access Join Date: Nov 2003 Location: in transit Posts: 3,873 Classified Rating: 0% (0)	just an idea. http://www.partsamerica.com/ProductD...pe=584&ptset=A and then http://www.opelgtsource.com/catalog/...words=info.htm

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)