Okay, so I have been going through stuff, and found the following
3 steel oil pans with pickup tubes and brackets, I have only one oil dipstick tube(Sold?)
New Aluminum radiator for GT, this is the OGTS old version.
I have a fuel injection setup, with distributor for a FAST system. Maybe someone will want to play with it, also a Turbo never used
2.0 European Block was from Opels Unlimited and probably the first engine run on the Hillbilly Dyno, complete shortblock, Cleaned up and oiled the walls and crank.
Air intakes, GT 1.1, 1.9
4 bearing heads
1.5 Head(Sold)
cams, performance and stock ground cams, couple unused
ARA Consoles for parts or repair
Tub full of gauges, mostly GT, some Manta and Kadett ones too
old steering wheels, I have one 1970 GT wheel that is rubberized and in pretty decent shape.
Slot mags with centers and lug nuts, have tires on them too that are pretty decent.
Opel early sway bar rear end
New rear GT Source Sway Bar, may be missing two bolts and some mount hardware that is easy to find.
2" lowering front spring and rear coil springs, for GT/Kadett
Steinmetz single sidedraft 1.9 with Weber
Old school header and exhaust parts
Resonators
4 new Venolia Pistons .040 oversized, were installed in block, dished forged pistons (turbo), rods and rings. Clean set
I have doors, hoods, windshields, wagon parts....let me know if you want something large and I will bring it. Final load time is Wednesday 17th.