'07 Carlisle parts thread

[Gary]

I am adding a rear resonator for an Ascona to my needs list..... (It's always something...)

[RallyBob]

Originally Posted by Gary I am adding a rear resonator for an Ascona to my needs list..... (It's always something...)

Stock?

[Rionart]

Anyone interested in a set of AeroCatches drop me a PM and I'll bring a few pairs down with me...

[opelspyder]

I will be bringing some large blueprint copies.Also a 1.9 head for Ron. I might have a valve cover or two, and some NOS key locks and mirror for various Opels. Look for the guy wearing a sign with Opel parts--- That will be me. I will have complete paperwork and tags for a 1972 Fireglow GT if anyone needs it. I am trying to carry smaller items that won't weigh me down. I will be trailering a 1979 MGB . My granfather purchased it down here, and needs it delivered. I will be heading home with an empty trailer and hope to pick up a deal or two. We'll see
Keith

[hrcollinsjr]

Anyone interested in a new set of 1.1 flat top pistons? I think I have some bearing sets also along with a few head gasket sets.

Harold

[oldopelguy]

Originally Posted by hrcollinsjr Anyone interested in a new set of 1.1 flat top pistons? I think I have some bearing sets also along with a few head gasket sets. Harold

Yes, me, as long as the pistons are at least one oversize.

[Gary]

Originally Posted by RallyBob Stock?

It has a stock set up on it right now, but I can change/adapt it.

[RallyBob]

Originally Posted by Gary It has a stock set up on it right now, but I can change/adapt it.

I think I have a new stock rear resinator, that's why I ask. And I seem to recall it's for a Manta Rallye (twin tips). I'll check the barn tonight or tomorrow.

Bob

[Gary]

Originally Posted by RallyBob I think I have a new stock rear resinator, that's why I ask. And I seem to recall it's for a Manta Rallye (twin tips). I'll check the barn tonight or tomorrow. Bob

That will be great Bob. I need to get it inspected this month

[neuropel]

I'm asking again...anyone coming to the show that has a manta spoiler? Used is ok, new is better. Charles, do you still have any of these laying around?

Todd

[RallyBob]

Originally Posted by Gary That will be great Bob. I need to get it inspected this month

So far I found a factory Kadett B Rallye resonator, and a Kadett C resonator, but so far no Manta/Ascona A resonator. I'll keep looking!

Bob

[Rionart]

If anyone has a set of NOS Manta Rallye fog lights they'd like to part with (I know , but I have to ask) I'm looking for a pair...willing to pay good money or trade large quantities of Canadian beer.....

[jordan]

Well it is time, here I have a very long list so pm me if you have any such thing that could make it's way to carlisle.

-a complete 1.9l engine in rebuildable condition for a 2.4l build up that can be brought to carlisle.

-any cracked or uncracked 1.5, 1.9, 2.2 heads that could be brought (cracked for practice porting, uncracked for the real deal) I am still at this point unsure on which particular head I want to use, so I am just checking availability.

-I would also be interested in a complete ready to run 1.1l engine to play around with.

-I also need some small GT sheet metal parts, PM me if you have or can bring such a thing and I will give specifics for the areas that I am looking for.

- I am in GREAT need of a driverside seat in excellent condition in black vinyl for a gt (great foam and upholstery)

-I am also looking for a very nice gt dash (few if any cracks) or a cheap "road map" dash for a trial leather recovering.

-Getrag 240 transmission (modded or unmodded)

[heimue]

I'm currently looking for a complete '75 1.9 EFI system, to swap into my Manta (instead of the current Weber).
Must be complete and in useable condition.

Dieter

[timemachine]

Dieter,

I may have what you are looking for.

Jim

[nhopel]

Jorden I have a set of black seats and some GT sheetmetal give me a call 603 387-2343 we can talk about what you need and I may have

Dennis

[BQS4]

Originally Posted by jordan -any cracked or uncracked 1.5, 1.9, 2.2 heads that could be brought (cracked for practice porting, uncracked for the real deal) I am still at this point unsure on which particular head I want to use, so I am just checking availability.

Jordan;
I have a useable 1.5 head. I also have several 1.9 motors, but, they're a bit much to bring one.
Gene

[hrcollinsjr]

Originally Posted by hrcollinsjr Anyone interested in a new set of 1.1 flat top pistons? I think I have some bearing sets also along with a few head gasket sets. Harold

Looks like the pistons are still up for grabs, $100. They are .5 oversize, ITM/Repco brand flat top. I'll be hauling my Carlisle stuff to OpelSpyder tomorrow morning for delivery He is only hauling pre-sold stuff for me.

Harold

[greenopelgt]

My man with all the Opels and Opel parts here in cincinnati is loading up my truck bed around the engine we are bringing for Vicki - maybe with doors, good working seat frames, and a bunch of stuff from the storage bins that has been inside for years. Maybe some bargins for you....and you ...and you.

If you want me to ask him for something special that you need just PM me ASAP and I'll pass the info along.

See ya all next week.

[hrcollinsjr]

Anyone with a good back seat for a '74 1900/Ascona sedan for sale?

Harold

[saxybiker]

Originally Posted by greenopelgt My man with all the Opels and Opel parts here in cincinnati is loading up my truck bed around the engine we are bringing for Vicki - See ya all next week.

Tom:

Thanks for the transport!!! Looks like we may need some sheet metal parts now too

See ya soon.

Vickie

[69whitegt]

Yeah tom, I hope you will have a little room left over for a rear fender and rear (trunk) pannel. I may be able to put them in the GT IDK Ill have to do a trail fit. I guess I could