Carlisle 2009 Parts Thread

Gary · 04-08-2009

List your parts requests or items you may bring to sell at the Carlisle show.

I will not be renting a vendor space this year. (PA Sales Tax B.S was the final straw) The Carlisle staff frown upon selling parts in the showfield area, but "trunk" sales have been happening for years.

jlthunder · 04-09-2009

Originally Posted by Gary

but "trunk" sales have been happening for years.

That's going to be rough for us GT owners

I have a bunch of used parts from the "Stinger" and other RIP GT's. PM me if you need a part and I will see if I have it. Since they are used, I usually just give them to the person who needs it.

P.J. Romano · 04-09-2009

Let us not forget to bring the can with keys - whoever has it now. I will contribute few keys and hope to find one for my fuel cap.

opeldean · 04-09-2009

I need a key for my "new" driver side door.( no jokes or comments from the head threadmeister

..its an inside joke.

I need 2 small size , anodized aluminum angles for pop out window trim.

BQS4 · 04-09-2009

Originally Posted by P.J. Romano

Let us not forget to bring the can with keys - whoever has it now. I will contribute few keys and hope to find one for my fuel cap.

Noted, and on my list to load in the Sportwagon..

jlthunder · 04-09-2009

Originally Posted by opeldean

I need 2 small size , anodized aluminum angles for pop out window trim.

I will look in my parts bin and see what I have. I will put your name on it if I find any.

Welsh Wizard · 04-12-2009

Anyone shopping for a 38DGAS this year , let me know and I will fetch one ( or two) down with me. DGAS hence hot water choke.

anastosmotors · 04-12-2009

I have a set of 48DCOE carbs with manifolds, Holley fuel pump and fuel
filter. If any one is interesting Pm me. I have few set of racing pistons ( venolia, Janz, ...)
Pete

jlthunder · 04-13-2009

Originally Posted by opeldean

I need 2 small size , anodized aluminum angles for pop out window trim.

I put them in the GT for Carlisle with your name on them. I hope I don't lose them between now and then.

markandson · 04-14-2009

I am still looking for decent exterior door trim and I also need a junk panhard bar so that I can use one of the ends to make my aluminum adjustable one.

jlthunder · 04-15-2009

Originally Posted by markandson

I am still looking for decent exterior door trim and I also need a junk panhard bar so that I can use one of the ends to make my aluminum adjustable one.

Jeff; I think I have a slightly bent panhard bar you can have. I'll throw it in the GT with the rest of the stuff. No cost, it is just sitting on a shelf wasting away.

Rionart · 04-27-2009

If anyone wants a set of the "AeroCatch" hood pins, let me know and I'll bring some down with me.

Ooooner · 04-27-2009

Anyone have a rear lower left (Driver's Side) quarter patch panel for a 1974 Manta?

BQS4 · 04-27-2009

Originally Posted by Ooooner

Anyone have a rear lower left (Driver's Side) quarter patch panel for a 1974 Manta?

Roy;
I may have one at home that I can cut off for you. Let me look when I get home tonight.

Ooooner · 04-27-2009

Originally Posted by BQS4

Roy;
I may have one at home that I can cut off for you. Let me look when I get home tonight.

Thanks, Gene... Just let me know what you have.... If you remember the picture I sent you before, you should know what I am after....

hrcollinsjr · 04-27-2009

Anyone needing any TN Opel parts, there may be a few from NC too

, please contact me with your needs. I have a few GT's, Ascona's, and have parted out some Manta's. Anyone looking for '75 front calipers?

Anyone near Boston or traveling near there between now and Carlisle? I'm looking for someone to pick something up for me if possible. It will not fit in a GT or Manta, Sportwagon - maybe.

Thanks,
Harold
haroldc@united.net

jerseydave · 04-27-2009

Originally Posted by Welsh Wizard

Anyone shopping for a 38DGAS this year , let me know and I will fetch one ( or two) down with me. DGAS hence hot water choke.

Send me a PM and let me know how much!!

hrcollinsjr · 04-27-2009

Anyone looking for 1.1 drivetrain stuff?

Harold

jerseydave · 04-27-2009

I still need a Rallye badge for my Manta

timemachine · 04-28-2009

I am parting a '70GT with good glass, doors and dash bits if anyone is looking for that.

Looking for sportwagon rear lenses...

CIARA1970 · 04-28-2009

Originally Posted by jerseydave

I still need a Rallye badge for my Manta

Is this the one that does on the deck lid?? if so I have one that I can send you this weekend. PM you shipping info

BQS4 · 04-28-2009

Originally Posted by timemachine

I am parting a '70GT with good glass, doors and dash bits if anyone is looking for that.

Looking for sportwagon rear lenses...

Jim;
I don't have an NOS set, but, I can bring a bunch of these and let you pick what you want.

MantAscona · 04-28-2009

Does anyone have a pair of black GT arm rests and kick panels available? I need these for a friend in Europe who is finishing up a restoration. They must be in excellent condition. Thanks.

Duane

opelspyder · 04-28-2009

I have a front Valance, front panel above the radiator, and front inner fenders for a Kadett NOS. The radiator upper panel is 1.9 specific. Harold Collins could deliver. I have several GT Windshields, not perfect, but decent tented one, a little haze on one side.
I may send up several NOS parts such as gaskets and 1.1 carb parts. Any offers on the sheetmetal? E-mail me as PM might not take
keithlundholm@yahoo.com

timemachine · 04-28-2009

Originally Posted by BQS4

Jim;
I don't have an NOS set, but, I can bring a bunch of these and let you pick what you want.

Thanks Gene, used is fine. I'll look about for any other small SW parts needed. Are the side markers same as Manta? If so I am covered.

Jim

04-09-2009	#4 (permalink)
opeldean 1000 Post Club Join Date: Apr 2003 Location: Overland Park KS Posts: 1,999	I need a key for my "new" driver side door.( no jokes or comments from the head threadmeister..its an inside joke. I need 2 small size , anodized aluminum angles for pop out window trim. __________________ Thank you members of opelgt.com for helping me on a 5 year reconstruction of the most beautiful car in the world Celeste: 1917,cc ,getrag resealed, 2liter Intake valves,ported,ISKY cam on solids,Opel forged rods,9.52 compression,total seal gapless,oil dam,RB gasket mod., DCOE side drafts,sprint,2in straight exhaust,pertronix,OMNI paint,SACHS clutch,OGTS & Kadette sway bars,Manta finned pan,3 V clock,Ball joints and Poly all... SAA-WEET!

04-12-2009	#7 (permalink)
Welsh Wizard Opeler Join Date: Sep 2005 Location: Bainsville, Ontario Posts: 45	38 dgas Anyone shopping for a 38DGAS this year , let me know and I will fetch one ( or two) down with me. DGAS hence hot water choke. __________________ Welsh Wizard

04-12-2009	#8 (permalink)
anastosmotors Member Join Date: Apr 2003 Location: kenosha, wi Posts: 379	set of 48DCOE with manifolds I have a set of 48DCOE carbs with manifolds, Holley fuel pump and fuel filter. If any one is interesting Pm me. I have few set of racing pistons ( venolia, Janz, ...) Pete __________________ * * * * * * * * * * * * * * Pete Anastopoulos www.anastosmotors.com info@anastosmotors.com * * * * * * * * * * * * * *

04-27-2009	#12 (permalink)
Rionart Manta Maniac Join Date: Mar 2002 Location: Toronto Posts: 1,186	Bump If anyone wants a set of the "AeroCatch" hood pins, let me know and I'll bring some down with me. __________________ Politicians and diapers have one thing in common. They should both be changed regularly and for the same reason.

04-27-2009	#13 (permalink)
Ooooner Moderator Join Date: Mar 2002 Location: Concord, North Carolina Posts: 1,118 Real Name: Roy Bell	Anyone have a rear lower left (Driver's Side) quarter patch panel for a 1974 Manta? __________________ Roy Bell 1973 Opel GT 74 Manta Rallye Concord, North Carolina Carolina Opel Club OMC

04-27-2009	#16 (permalink)
hrcollinsjr 2200 Post Club Join Date: Jan 2003 Location: Chapel Hill, TN Posts: 2,267 Real Name: Harold Collins	Anyone needing any TN Opel parts, there may be a few from NC too , please contact me with your needs. I have a few GT's, Ascona's, and have parted out some Manta's. Anyone looking for '75 front calipers? Anyone near Boston or traveling near there between now and Carlisle? I'm looking for someone to pick something up for me if possible. It will not fit in a GT or Manta, Sportwagon - maybe. Thanks, Harold haroldc@united.net

04-27-2009	#18 (permalink)
hrcollinsjr 2200 Post Club Join Date: Jan 2003 Location: Chapel Hill, TN Posts: 2,267 Real Name: Harold Collins	Anyone looking for 1.1 drivetrain stuff? Harold

04-27-2009	#19 (permalink)
jerseydave Member Join Date: May 2004 Location: New Jersey Posts: 692	I still need a Rallye badge for my Manta __________________ Dave 73 Opel GT-work in progress 74 Manta 75 Manta Previous 72 Manta Rallye-owned 1974-1979

04-28-2009	#20 (permalink)
timemachine Member Join Date: Jan 2006 Location: Swarthmore, PA Posts: 871 Real Name: Jim	I am parting a '70GT with good glass, doors and dash bits if anyone is looking for that. Looking for sportwagon rear lenses... __________________ '74 Manta ("Sig") '75 Sportwagon (project) '72 GT (whenever I get to it) Sold or wrecked: '72 Manta Rallye '73 Manta '74 Luxus

04-28-2009	#23 (permalink)
MantAscona Kick a little asphalt Join Date: Mar 2002 Location: Plumsteadville, Pennsylvania Posts: 1,090	Does anyone have a pair of black GT arm rests and kick panels available? I need these for a friend in Europe who is finishing up a restoration. They must be in excellent condition. Thanks. Duane __________________ "The bitterness of poor quality remains long after the sweetness of low price is forgotten"

04-28-2009	#24 (permalink)
opelspyder Opel Key Master Join Date: Mar 2002 Location: Tennessee Posts: 1,301	NOS Sheetmetal Kadett I have a front Valance, front panel above the radiator, and front inner fenders for a Kadett NOS. The radiator upper panel is 1.9 specific. Harold Collins could deliver. I have several GT Windshields, not perfect, but decent tented one, a little haze on one side. I may send up several NOS parts such as gaskets and 1.1 carb parts. Any offers on the sheetmetal? E-mail me as PM might not take keithlundholm@yahoo.com __________________ Questions or comments to the Project: Restoration of a GT series 2 -post here http://www.opelgt.com/forums/opel-gt...eries-2-a.html Last edited by Ooooner; 04-28-2009 at 03:26 PM.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode