Weber 32/34 dmtl on 1992 Vectra A

ceemark · 03-22-2005

I have a question about weber carbs, I have a weber 32/34 dmtl, which I would like to fit to my Vectra A (cavalier in the UK) 1800, (1992 model, sorry it's not a classic opel...YET!) to replace the pierburg, does anyone know exactly what I need to fit it? Just remembered the weber was from an Opel Manta

Thanks Clint

baz · 03-22-2005

hi and welcome from sunny sunderland
only know the pierburg on fords but if its anything like them you will need to make an adapter as the pierburg was 3 bolt right through from the top and the weber's are normaly 4 bolt

if it works ok let us know as we will end up with a plage of requests to find them as they are bigger than the webers that normaly get used
where abouts are you in surrey btw

ceemark · 03-22-2005

I'm in Guildford, I had a Pierburg on my Sierra as well, you know I never ever looked at how it was attached.

baz · 03-22-2005

always thought it was a good carb on the 1.8 cvh sierra better than the VV thats for sure

ceemark · 03-27-2005

Does any one know exactly what I need to fit a weber 32/34 dmtl carb to my 1992 (k reg) Cavalier 1.8 engine (Vectra A). I have the carb, just need to know the bits and pieces that go on the manifold.

Thanks
Clint

baz · 03-27-2005

.sorry i must of read the post wrong
this was answered in your other post you need to make an adapter plate to change from a 3 bolt fit to a 4 bolt fit if its the pierburg im thinking of

kwilford · 03-28-2005

First, Moderators frown on duplicate threads

. So I merged this latest thread with your previous thread.

Second, this model is not very well supported on this web site, as we are mainly "classic" Opels (pre-1976) that were imported into North America. And few (if any) of us have ever seen a Vectra (except disguised as a Saturn "L Series in later years, and unsuccessfully at that). A few of our International members (as in OpelJim in New Zealand) might have. So I had already moved the previous thread to the "Other Models" Forum.

Third, it is almost certain that none of us have ever seen a Weber 32/34 DMTL.

Sorry, but that's the best I can do.

03-22-2005	#1 (permalink)
ceemark Opeler Join Date: Mar 2005 Location: Surrey Posts: 3	Unanswered: weber 32/34 dmtl I have a question about weber carbs, I have a weber 32/34 dmtl, which I would like to fit to my Vectra A (cavalier in the UK) 1800, (1992 model, sorry it's not a classic opel...YET!) to replace the pierburg, does anyone know exactly what I need to fit it? Just remembered the weber was from an Opel Manta Thanks Clint Last edited by ceemark; 03-22-2005 at 03:01 PM.

03-22-2005	#2 (permalink)
baz opel free after 26 years Join Date: Jun 2002 Location: sunderland england Posts: 4,941 Real Name: barry williams Provided Answers: 4	hi and welcome from sunny sunderland only know the pierburg on fords but if its anything like them you will need to make an adapter as the pierburg was 3 bolt right through from the top and the weber's are normaly 4 bolt if it works ok let us know as we will end up with a plage of requests to find them as they are bigger than the webers that normaly get used where abouts are you in surrey btw __________________ Copyright © 2003-2009 barry williams All Rights Reserved save praying to God for sunday today we pray to Nike and run like hell

03-22-2005	#4 (permalink)
baz opel free after 26 years Join Date: Jun 2002 Location: sunderland england Posts: 4,941 Real Name: barry williams Provided Answers: 4	always thought it was a good carb on the 1.8 cvh sierra better than the VV thats for sure __________________ Copyright © 2003-2009 barry williams All Rights Reserved save praying to God for sunday today we pray to Nike and run like hell

03-27-2005	#5 (permalink)
ceemark Opeler Join Date: Mar 2005 Location: Surrey Posts: 3	Weber 32/34 for 1.8 Cavalier (Vectra A) Does any one know exactly what I need to fit a weber 32/34 dmtl carb to my 1992 (k reg) Cavalier 1.8 engine (Vectra A). I have the carb, just need to know the bits and pieces that go on the manifold. Thanks Clint

03-27-2005	#6 (permalink)
baz opel free after 26 years Join Date: Jun 2002 Location: sunderland england Posts: 4,941 Real Name: barry williams Provided Answers: 4	.sorry i must of read the post wrong this was answered in your other post you need to make an adapter plate to change from a 3 bolt fit to a 4 bolt fit if its the pierburg im thinking of __________________ Copyright © 2003-2009 barry williams All Rights Reserved save praying to God for sunday today we pray to Nike and run like hell Last edited by baz; 03-27-2005 at 04:20 PM.

03-22-2005	#3 (permalink)
ceemark Opeler Join Date: Mar 2005 Location: Surrey Posts: 3	I'm in Guildford, I had a Pierburg on my Sierra as well, you know I never ever looked at how it was attached.

03-28-2005	#7 (permalink)
kwilford Über OpelGT.com Moderator Join Date: Mar 2002 Location: Calgary, Alberta, Canada Posts: 4,087 Real Name: Keith Wilford Provided Answers: 4	First, Moderators frown on duplicate threads . So I merged this latest thread with your previous thread. Second, this model is not very well supported on this web site, as we are mainly "classic" Opels (pre-1976) that were imported into North America. And few (if any) of us have ever seen a Vectra (except disguised as a Saturn "L Series in later years, and unsuccessfully at that). A few of our International members (as in OpelJim in New Zealand) might have. So I had already moved the previous thread to the "Other Models" Forum. Third, it is almost certain that none of us have ever seen a Weber 32/34 DMTL. Sorry, but that's the best I can do. __________________ Keith Wilford working on my '71 GT and '75 SportWagon

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode