Water Pump/Alternator belt

Dan · 02-09-2003

I need a new belt and I think I tossed the old torn up one away when I took it off. The one Napa sold me is too short and I was wondering if anyone knew the proper length for a 70 1.9L in a GT.

Thanks

Dan

odieopel · 02-09-2003

My '70 takes a 9.5mm width, 8.0mm deep and 925mm long. I think they are the same for all years.

scarpash · 10-16-2003

Greetings from Italy!

My 1970 GT 1.9 has a trapeze section belt mounted

these are the codes written on the belt:

BOSCH 7639 AVX 10x925 La250 (written in red)
A 621 0297 (written in green)

I hope this codes could be useful

I have a problem too: I'm searching for the crankshaft pulley.
Can you help me?

e-mail: scarpash@libero.it

kmon · 10-16-2003

Just put a new belt in the gt monday when my waterpump went out. Use the codes scarpash gave or try and fish the old one out of the trash. Its not a rare item, I was able to find a place in my town with them instock (amazing for my town!).

As for the pulley OGTS has them and so does opels unlimited last time I checked. Or you can call TGSI and get a set of 'power' pulleys.

02-09-2003	#1 (permalink)
Dan Member Join Date: Mar 2002 Location: Spokane, WA Posts: 241	Water Pump/Alternator belt I need a new belt and I think I tossed the old torn up one away when I took it off. The one Napa sold me is too short and I was wondering if anyone knew the proper length for a 70 1.9L in a GT. Thanks Dan

10-16-2003	#3 (permalink)
scarpash Opeler Join Date: Oct 2002 Location: Pavia, Italy Posts: 5	BOSCH belt Greetings from Italy! My 1970 GT 1.9 has a trapeze section belt mounted these are the codes written on the belt: BOSCH 7639 AVX 10x925 La250 (written in red) A 621 0297 (written in green) I hope this codes could be useful I have a problem too: I'm searching for the crankshaft pulley. Can you help me? e-mail: scarpash@libero.it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-09-2003	#2 (permalink)
odieopel Opeler Join Date: Nov 2002 Location: Thornton, Co 80233 Posts: 15	My '70 takes a 9.5mm width, 8.0mm deep and 925mm long. I think they are the same for all years.

10-16-2003	#4 (permalink)
kmon Member Join Date: Feb 2003 Location: Laramie, WY Posts: 137	Just put a new belt in the gt monday when my waterpump went out. Use the codes scarpash gave or try and fish the old one out of the trash. Its not a rare item, I was able to find a place in my town with them instock (amazing for my town!). As for the pulley OGTS has them and so does opels unlimited last time I checked. Or you can call TGSI and get a set of 'power' pulleys.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)