Project Ascona B 2,0 CIH Turbo

[kma]

Hi all Opelfriends "over there" or elsewhere off course.
Here is my contribution to Opels survival and making them go faster.
Sorry about the text (in Swedish) but you can always look att the pictures.

Today i have a 2,2i from Rekord built in but it will be replaced sometimes in the future.

Spec. on the turboengine

Ported 2,2 head with TG 75T camshaft specially made for turboengine, forged 45/40 valves, double valvesprings.
1,9 Engineblock with forged 96 mm Volvo pistons, SAAB H-profile steelrods 134 mm c-c. Flywheel lightened and balanced together with crankshaft.
Stiffer pressureplate? with sinterplate.

More info to come in the future

//Magnus

[2 Fast 4 U]

Going to have to brush up my Swedish, looking good Magnus, keep us posted!!
Does any one know a translation tool for Swedish to English??

[kma]

Hello!

Try here Tyda.se - översättning på nätet mellan svenska och engelska [lexikon/ordlista]

Type the word where the cursor is

//Magnus

[davegt27]

the text translator seems to be working a little

Free Website Translator. Online Website Translation



Davegt27

[alpharm]

Hi all Opelfriends "over there" or elsewhere off course.
Here is my contribution to Opels survival and making them go faster.
Sorry about the text (in Swedish) but you can always look att the pictures.

Today i have a 2,2i from Rekord built in but it will be replaced sometimes in the future.

Spec. on the turboengine

Ported 2,2 head with TG 75T camshaft specially made for turboengine, forged 45/40 valves, double valvesprings.
1,9 Engineblock with forged 96 mm Volvo pistons, SAAB H-profile steelrods 134 mm c-c. Flywheel lightened and balanced together with crankshaft.
Stiffer pressureplate? with sinterplate.

More info to come in the future

//Magnus

I have to refer that you have done an excellent work

[kma]

I have to refer that you have done an excellent work

Thank You

Heres the next challenge Ive started up.
Building a CIH 16V cylinderhead. The head is obtained , only the rest left.




Doesnt it look nice?

[2 Fast 4 U]

Just the engine I'm looking for, for my Ascona, don't care about the HP but I would certainly love the torque

[kma]

Ive started to make some details in fiberglass. For example: frontpanel , rearviewmirrors in own design. More to come: widened frontwings,original frontwings,bonnet,bootcover etc.

You can always look at the pictures on my "homepage"

Please adjust my english if its necessary. Its difficult with names on all parts of a car.

[kma]

Do you have this much rust down there?
I have started rebuilding the floor. Not the original look but it doesnt matter as long as the water is kept out.

[IMG][/IMG]

[2 Fast 4 U]

Not that much any more but my car had some restoration done before

I see that you are using Volvobromsar is it a bolt on system or are there modifications needed?? From what model Volvo are the bromsar??

[2 Fast 4 U]

It's a lot of work for what you are doing but I saw that you have help

[jordan]

I am curious as to what these injector plates are specifically. I have never heard of an aluminum injector plate for an opel manifold, but from my understanding the 2.4 manifold are made for o-ring injectors but I thought they were still phenolic. The ones on this manifold which appears to be a 3.0l manifold cut down are modified, but what did they start as? http://bp0.blogger.com/_6tNzc_lQJZk/.../insug+001.jpg

[RallyBob]

I am curious as to what these injector plates are specifically. I have never heard of an aluminum injector plate for an opel manifold, but from my understanding the 2.4 manifold are made for o-ring injectors but I thought they were still phenolic. The ones on this manifold which appears to be a 3.0l manifold cut down are modified, but what did they start as?

That's called 'overspray'.....

They look like the phenolic ones to me, with some silver paint on them.

Bob

[jordan]

Bob, if you look closer you'll see what appears to be casting flash in the front of it and they appear to have additional sleeves of some sort welded to them.

[2 Fast 4 U]

Bob, if you look closer you'll see what appears to be casting flash in the front of it and they appear to have additional sleeves of some sort welded to them.

You're right Jordan, the injector mounts are welded to the injector plates.

[RallyBob]

Bob, if you look closer you'll see what appears to be casting flash in the front of it and they appear to have additional sleeves of some sort welded to them.

I dunno, I still think they're phenolic plates, and the injector bungs look epoxied in place to me, then painted silver. Perhaps Magnus will comment on how he did the fitment.

Bob

[Filip Trpeski]

Hi friend,

I am very interested about your blog, but i don't understand a word. Can u somehow translate it on english please and poste it back or send me on my email: tfilip_69@hotmail.com

Thanks

[kma]

OOOppss

Im not updated here. Havent got any form of message that you guys have posted in my thread. Sorry for a whole month.


The injectorplates comes from 2,0 E (maybe they are different here in Sweden)and is made of aluminium. 2,4 has phenolic.
I have welded (maybe my welding skills make them look epoxied Bob) new injector bungs to fit the Bosch injectors.

Bob ...... I dont understand that thing "overspray" Does it mean that I have painted them?

The manifold comes from 3,0 Monza , yes. Volvo 960 throttle body.


Filip..... I´ll see what I can do!

[kma]

Not that much any more but my car had some restoration done before

I see that you are using Volvobromsar is it a bolt on system or are there modifications needed?? From what model Volvo are the bromsar??

Calipers = bromsar or bromsok

Honda Prelude 2,0 i 16V -89-90 rotors 262mm
Volvo 240 Girling calipers

The calipers fits the Opelholes but they must be milled 2-3mm on the attachments (approx 1/10 of an inch) to center over the rotor.

Sorry kept you waiting for the answer

[kma]

Done some work in fiberglass.
These are the forms to the bonnet



This is how the front fenders will be. I´ll make them in fiberglass too.



And last. The rear fenders i´ve started to widen.