starting problem help - my progress

[opel kid]

well here is what i have done to my car...
As a lot of u guys know my 69 GT was going to be a drag car,the original firewall was cut out and just a single break was left...meaning the whole firewall was cut out and a plain sheet of metal was added.

here in the pics are what i had to do,the other thing is the radiator support i needed.[img]
http://www.opelgt.com/photos//data/500/thumbs/2007_0506Image0015.JPG[/img]

[jeff denton]

Ah, that looks like step one of my pedal relocation mod.
So you plan to put it all back to stock?
Shouldn't be too bad of a project.

[opel kid]

Ah, that looks like step one of my pedal relocation mod.
So you plan to put it all back to stock?
Shouldn't be too bad of a project.

yea that's my plan anyhow

[opel kid]

well now i finally have all my hoses on my car...only problem is i don't know which hoses go where in the retard and advance goes to which hose point (it's a 69 setup (2 diaframs)
any one know which goes where

[opel kid]

well now i finally have all my hoses on my car...only problem is i don't know which hoses go where in the retard and advance goes to which hose point (it's a 69 setup (2 diaframs)
any one know which goes where

[gtmaxx]

im doing the same exact thing to my car the guy was going to put a v6 in it hey you want to chat? please!

[wrench459]

why even have a retard hose at all
would be my question
ok I'll try to answer my own question
depends on your setup... theres 59 million ways and combo's did I leave
one out

[opel kid]

why even have a retard hose at all
would be my question
ok I'll try to answer my own question
depends on your setup... theres 59 million ways and combo's did I leave
one out

well ummmmm does that mean i don't need it?
really doesn't answer my question.

[wrench459]

depends on your setup
the opel head is not the best flowing thing in the world
which would point you into putting more advance into the timing curve

[Lindsay]

http://www.opelgt.com/forums/group-6...nnections.html

http://www.opelgt.com/forums/engine-...nnections.html

These two threads discuss distributor and emissions hose routings. On three different GTs', I plugged distributor vacuum retard. My opinion was that distributor retard was for emissions specs and I was more concerned about distributer advancing, then retarding (back & forth).

http://www.opelclub.com/TuneUpPart1bJune2006.pdf

[opel kid]

http://www.opelgt.com/forums/group-6...nnections.html

http://www.opelgt.com/forums/engine-...nnections.html

These two threads discuss distributor and emissions hose routings. On three different GTs', I plugged distributor vacuum retard. My opinion was that distributor retard was for emissions specs and I was more concerned about distributer advancing, then retarding (back & forth).

http://www.opelclub.com/TuneUpPart1bJune2006.pdf

thanks Lindsay that helped a lot!

[sugg578]

So when do you think she will be done.

[opel kid]

Hooked a battery to the car today and to my amazement everything works (not sure about clock)
put some gas in the carb and it fired up very quickly!
it's nice to see everything working out great and coming together!

[sugg578]

I am happy for you and I know how you feel to get her started up with.

[opel kid]

here are some pics of the new firewall in

[opel kid]

here are some pics of the new firewall in

here is the radiator support cross member in


the last pic is my main body
problem...

just wanted to throw this out there also but the {break} panel switch well when i push it the red light comes on but also my horns go off!
before they didn't go off when i pushed it and i haven't done any re wiring...is this normal???

[opel kid]

Well i put a new weber carb on today.
I have fuel going in carb.
Moter startes than dies. pump the gas pedal 3 times it cranks than dies.
i did not put my vacuum lines on yet , i'm going to put them on
tommrow i hope that is my problem.
Please tell me what you think....
This car wants to come alive but i need all of your advise.

[opel kid]

Well i put a new weber carb on today.
I have fuel going in carb.
Moter startes than dies. pump the gas pedal 3 times it cranks than dies.
i did not put my vacuum lines on yet , i'm going to put them on
tommrow i hope that is my problem.
Please tell me what you think....
This car wants to come alive but i need all of your advise.

:
is anyone out there?

[sugg578]

gave it the battory and stuff like that it might work lol

[Mike Preble]

Does it die as soon as you let go of the key? If so then you may not have 12 volts going from the run part of the ignition switch to the coil. If it runs momentarily after letting go of the key trying to run but stalling out then you are possibly looking at something you changed from before like a vacuum (sp) leak or something with the carb you just put on. Good luck.
Mike