+ Reply to Thread
Results 1 to 7 of 7

Thread: Weber 32/34 dmtl on 1992 Vectra A

  1. #1

    weber 32/34 dmtl

    I have a question about weber carbs, I have a weber 32/34 dmtl, which I would like to fit to my Vectra A (cavalier in the UK) 1800, (1992 model, sorry it's not a classic opel...YET!) to replace the pierburg, does anyone know exactly what I need to fit it? Just remembered the weber was from an Opel Manta

    Thanks Clint
    Last edited by ceemark; 03-22-2005 at 02:01 PM.

  2. #2
    opel free after 26 years baz is on a distinguished road baz's Avatar
    Join Date
    Jun 2002
    Location
    sunderland england
    Posts
    5,075


    hi and welcome from sunny sunderland
    only know the pierburg on fords but if its anything like them you will need to make an adapter as the pierburg was 3 bolt right through from the top and the weber's are normaly 4 bolt if it works ok let us know as we will end up with a plage of requests to find them as they are bigger than the webers that normaly get used
    where abouts are you in surrey btw
    Copyright © 2003-2010 barry williams
    All Rights Reserved

    B.O.O.B. founding member


  3. #3
    I'm in Guildford, I had a Pierburg on my Sierra as well, you know I never ever looked at how it was attached.

  4. #4
    opel free after 26 years baz is on a distinguished road baz's Avatar
    Join Date
    Jun 2002
    Location
    sunderland england
    Posts
    5,075


    always thought it was a good carb on the 1.8 cvh sierra better than the VV thats for sure
    Copyright © 2003-2010 barry williams
    All Rights Reserved

    B.O.O.B. founding member


  5. #5

    Weber 32/34 for 1.8 Cavalier (Vectra A)

    Does any one know exactly what I need to fit a weber 32/34 dmtl carb to my 1992 (k reg) Cavalier 1.8 engine (Vectra A). I have the carb, just need to know the bits and pieces that go on the manifold.

    Thanks
    Clint

  6. #6
    opel free after 26 years baz is on a distinguished road baz's Avatar
    Join Date
    Jun 2002
    Location
    sunderland england
    Posts
    5,075


    .sorry i must of read the post wrong
    this was answered in your other post you need to make an adapter plate to change from a 3 bolt fit to a 4 bolt fit if its the pierburg im thinking of
    Last edited by baz; 03-27-2005 at 03:20 PM.
    Copyright © 2003-2010 barry williams
    All Rights Reserved

    B.O.O.B. founding member


  7. #7
    Über OpelGT.com Moderator kwilford is on a distinguished road kwilford's Avatar
    Join Date
    Mar 2002
    Location
    Calgary, Alberta, Canada
    Posts
    4,161


    First, Moderators frown on duplicate threads . So I merged this latest thread with your previous thread.

    Second, this model is not very well supported on this web site, as we are mainly "classic" Opels (pre-1976) that were imported into North America. And few (if any) of us have ever seen a Vectra (except disguised as a Saturn "L Series in later years, and unsuccessfully at that). A few of our International members (as in OpelJim in New Zealand) might have. So I had already moved the previous thread to the "Other Models" Forum.

    Third, it is almost certain that none of us have ever seen a Weber 32/34 DMTL.

    Sorry, but that's the best I can do.
    Keith Wilford
    working on my '71 GT and '75 SportWagon

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts