little brass pipe loose

2 Fast 4 U · 08-30-2008

I have a problem that is only noticed when I change fuel from LPG to gas, the little brass pipe that lets the gas in the carb, comes out of its place, how and with what can I make this, so it will not come off again??

BQS4 · 08-30-2008

Superglue comes to mind.......

traytodd · 08-30-2008

I asked that question a couple of months ago with respect to my Weber 32/36. The answer was to pull t he tube and drill and tap the hole with an NPT. Then screw in a hose barb. I have not done it yet. When I do, I plan to move the inlet to the otherside to shorten the hose run. Maybe I will even install an elbow to eliminate the bend.

Terry

08-30-2008	#1 (permalink)
2 Fast 4 U Detroit,where my home was Join Date: Oct 2005 Location: Maria - Hoop, The Netherlands Posts: 2,216 Real Name: Erick Provided Answers: 5	Unanswered: little brass pipe loose I have a problem that is only noticed when I change fuel from LPG to gas, the little brass pipe that lets the gas in the carb, comes out of its place, how and with what can I make this, so it will not come off again?? __________________ Opel Ascona; driving one is like living on the edge. Only built from 1970 - 1975

08-30-2008	#2 (permalink)
BQS4 Southern Red Neck Join Date: Mar 2002 Location: Snellville, GA Posts: 6,028 Real Name: Gene Provided Answers: 12	Superglue comes to mind....... __________________ "Yes, I do have a rifle rack in my Sportwagon"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)