Opel GT Forum banner

1 - 9 of 9 Posts

·
tomking
Joined
·
2,464 Posts
Hiro, who sells the aluminum lifters for the CIH? And is that hard anodizing on both ends or other hard insert? Thanks.
 

·
GT Owner
Joined
·
316 Posts
Hi to all,
I've received my alu lifters from Germany,
Nice part weights about 38g each,
Now I'll order some custom-made ones for my roller rockers,
Should be OK for my "high rev" 2.3 CIH
Hiro
Would these have also worked in your roller rockers ?
 

·
Super Moderator
Joined
·
13,483 Posts
Bob, This thread is over 10 years old and the original poster has not been onsite in 4 years.
Yup. Hiroshi has had some health problems and has dropped off all the Opel forums. We stay in touch once or twice per year via email however.

Jörg Waltemathe (Yellowstorm) no longer makes the aluminum lifters.

However Rene (Driftmaster) manufactures his own lightweight CIH solid lifters.
 

·
GT Owner
Joined
·
316 Posts
Yup. Hiroshi has had some health problems and has dropped off all the Opel forums. We stay in touch once or twice per year via email however.

Jörg Waltemathe (Yellowstorm) no longer makes the aluminum lifters.

However Rene (Driftmaster) manufactures his own lightweight CIH solid lifters.
Thank you for the info. I have a new set of those aluminum lifters and was considering using them with my roller rockers.
 
1 - 9 of 9 Posts
Top