Opel GT Forum banner
1 - 1 of 1 Posts

· Super Moderator
Joined
·
9,837 Posts
After you replace the pan, you unscrew the plug on the driver's side of the trans, it's about 1/2 way up and in the middle on the driver's side. Get a gallon of 90w gear oil with a pump, PEP Boys sells these real cheap, then stick the end of the hose into the openign where the plug came out, and pump away till the gear oil starts running out, stop pumping, and put the plug back in and wipe up any mess, you're done!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top