Posts by bear
1 - 3 of 9 Posts
Me Too, Thanx Bob, I'm getting ready to disassemble the front end of my GT and I wanted to liberally lube the individual spring leafs like I read on the list somewhere to do. It'll be a total teardown, clean, treat and paint. Same as the rest of the car. I think I need much more time, August is fast approaching, and my dash just left to get rebuilt. I might be in the same boat you are, more to do than the alloted time and I might not make it to OMC, at least not with the GT. 
Ron
Ron
That's cool Bob, I've got a roll of Teflon tape, but it's only 1/4" wide, so I won't have enough to do the springs. Plus I've already got the Poly bushings from OGTS. On a side note I tried to get to Baker Precision and they're extremely busy on the phone lines, I couldn't tell them their website is screwed up, I couldn't get to the Neo product line. So I had to go to one of their competitors to get the grease. 14 oz. for about $10-15 including shipping. Plus both Neo and Baker Precision have the same phone numbers, kinda weird.
Ron
Ron
1 - 3 of 9 Posts
