Opel GT Forum banner
1 - 1 of 1 Posts

· rust + magic = gold!
Joined
·
169 Posts
The connector has two halves, and the "release flap" that you mention is actually for removing the wrong half. The flap allows the socket to be pushed into the fuseblock. Not what you need to do.

Just wiggle and pull on the outer most half, and it should come out. There are 6 spade connections within the plastic block and they are probably holding on tight!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top