Joined
·
218 Posts
Hey Everyone I need a new factory header for my 69 G.T. 1.1 liter mine was drilled crooked when we went to take it apart
let me know if anyone has one thanks
Mike,
let me know if anyone has one thanks
Mike,
Need new Exhaust Manifold for 1.1 or old one repaired
1 - 4 of 4 Posts
Joined
·
218 Posts
Actually my mistake I need the header and the full downpipe to the front muffler mine is bad
Thanks
Mike,
Thanks
Mike,
Joined
·
5,564 Posts
Fix It!
The cast iron header can be weld repaired if necessary - not as many 1.1 exhaust manifolds about as 1.9L ones! It may even be possible to drill the hole out square and fit a helicoil - have a talk to someone at your local motorcycle shop as the offroader bikers usually know all the good welders and how to put helicoils in.
HTH
The cast iron header can be weld repaired if necessary - not as many 1.1 exhaust manifolds about as 1.9L ones! It may even be possible to drill the hole out square and fit a helicoil - have a talk to someone at your local motorcycle shop as the offroader bikers usually know all the good welders and how to put helicoils in.
HTH
Joined
·
345 Posts
mike did you ever find one if not contact me i have one that is in decent shape
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
6D - Exhaust SystemI purchased a header from OpelGTSource and I have the intake manifold off, the coolant intake body off, and everything out of the way but I have a big problem :) The darn head pipe I couldn't get off the exhaust manifold as the heads either didn't move, stripped, or popped off. So now there...
- 57
- 3K
-
6D - Exhaust SystemHi guys so I got my Gt yesterday. I was looking at the exhaust. The exhaust only had one muffler! Is that correct? Also The muffler doesn't look like this one from Opel GT source. It looks like this oval muffler. The tailpipe doesn't look like this either. It has no muffler where the dual pipes...
- 3
- 419
-
Young Gt Lover · updated
-
6D - Exhaust SystemI think I was about to make a big mistake. I have what I believe is a standard center muffler, resonator and over axle pipe for a 73 GT. I have the 2.2FI with the original exhaust manifold. My car is at the local exhaust right now. It wa suppose to be done today but when I checked on it he said...
- 12
- 2K
-
6D - Exhaust SystemI like the 2.4 exhaust manifold that my engine came with. I've had 2.0 headers. Yawn, been there, done that. I want to make the stock one work on my GT. But the darn exit end is angled a little to the passenger side and not straight down. How can I make this thing work on a GT? The only way...
- 36
- 4K
-
The Scifi Guy · updated
-
6D - Exhaust SystemI would like some help with a design for a torque producing head pipe for a 2.4L exhaust manifold. It's going in my GT, along with a 1.9/2.4L engine with 2-44mm Screaming Eagle CV carbs. Can anyone do a drawing with approximate dimensions, pipe dimensions, collector length and location...
- 15
- 2K
-
krewzer · updated
Join now to ask and comment!