[Travis]

1 long link goes to the body mount
1 long link goes to the axel mount
the bracket bolts to the diff cage
these i know
as for the bracket and short link i think thetriangle bracket welds in and link to give a second body fitting point to locate the axel in 2 planes

Close
1 long link to the stock panhard mount on the body
1 long link to the triangle bracket which connects to the body somehow
The center bracket bolts on top of the diff cover
the short link connects to the panhard mount on the axle to help support the center bracket

-Travis

 

[Travis]

Not that I'm saying could be made cheaper using a stock rear cover or anything but this seller has some pretty cheap Heim joints in metric size.

http://stores.ebay.com/VXB-Bearings-Skateboard-and-Slotcar_W0QQsspagenameZl2QQtZkm

Be very cautious when replacing suspension pieces or other parts which could cause bodily harm if they failed. This is no time to skimp on quality. I like the QA1 Endura 2000 in chromoly, but everyone seems to have their own favorite.

Also keep in mind that unless the race is teflon lined, it will start making annoying ticking noises in short order, if not before you install it...

-Travis