[BQS4]

Dan (aka Mr. Ging)
You can drill and tap a new hole, or you can do the heli-coil, either way is possible. I do have two extra bellhousings here if you want to go that route. The threaded bolt hole does go all the way through. There is also a little lee-way on drilling the corresponding hole in the trans itself. But, if you're going to go that far, why not come get one of the extra housings I have.
Gene

 

[BQS4]

Just to set the record straight, and a little off-subject, "Ging" is female, and her real name is Virginia. Dan, aka "Mr. Ging" is a joke, as it was Ging that contacted us first and Dan has always been in the back ground. I started the "Mr. Ging" as I didn't know Dan's name at the time. These two are wonderful people and have the most ernest inspiration to become "Opel-holics"

 

[BQS4]

Ging;
At this time, I don't have a whole car to spare. In fact, I need to get my GT in the garage to get started on the nose body work. But, you're still welcome to the bellhousings