That DAMN Fan Shroud
1 - 5 of 5 Posts
Taking the Fan off before installing the shroud is the easiest way! You shouldn't have to remove anything else besides the fan. One thing about the placement of the fan to the shroud it (the fan) should be at least half way or more in the hollow of the shroud in order for the shroud to even do it's job correctly.
RITTER
RITTER
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
6B - Cooling SystemI have read a lot of threads about overheating issues, but those are all (unless I missed one) mainly the car heating up at idle, due to lack of airflow, etc. This overheating at speed has happened before in similar situation, but I have done trips at speed without it occurring. Cruising at...
- 16
- 730
-
rockytopmark · updated
-
6B - Cooling SystemNoticed today I have a coolant drip, not able to get underneath it yet, wondering if it’s the lower radiator hose (the end is a bit wet) traveling to the front of the engine, or is it the water pump gasket? In the video you can see the drip in front of the pulleys. There’s a puddle on the...
- 23
- 1K
-
Luxusburg · updated
-
6B - Cooling SystemI am wanting to add a overflow tank to my new aluminum radiator. Do any of you have pictures and what tanks you used that you could share? Thanks....
- 21
- 1K
-
Ooooner · updated
-
6B - Cooling SystemI have a 1974 Opel Manta Rallye 4spd. I'm having trouble finding a place to re-core my original radiator. I'm looking at purchasing a replacement aluminum radiator on eBay. There is a China manufactured one available from Winner Racing and there is one made in the UK by Coolex Heat Transfer LTD...
- 32
- 2K
-
74MantaRalley · updated
-
6B - Cooling SystemWell, I thought I had exorcised the leak at my water pump gasket but recently I noticed coolant pooling on top of the pump again. I had test-driven it several times after the last repair, and it was dry each time I checked, so I’m puzzled. So now I want to try pressure-testing the cooling...
- 7
- 442
-
bolbers · updated
