timing cover question
1 - 3 of 3 Posts
Joined
·
2,116 Posts
i belive i have heard of people pulling the timing chain cover and leaving the head, but its hard to get a good seal between the timing chain cover and head again.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
6A - Engine MechanicalI found some thing interesting today that I never noticed before ( if I did I must have said well it's running fine leave it alone) But it now has me very curios. 1, the advance hose off the distributor is going to the tree ( 73 with both advance and retard ports) 2, the retard hose off the...
- 25
- 860
-
terrylewisac · updated
-
6A - Engine MechanicalDoes anyone have the diagram of the Opel CIH engine oil delivery system? I've seen it, but I don't have a pic of it. It shows the flow of oil through the engine.
- 8
- 539
-
The Scifi Guy · updated
-
6A - Engine Mechanicalhello GT people im was wondering if my 5w-40 Castrol GTX Magnatec oil will "work" whit my orginal. 1,9s engine and if people could wright their engine oil here that could be a nice way to tjek out whit oil is the bedst ect.
- 29
- 3K
-
6A - Engine MechanicalA few years ago I replaced the front engine crankshaft seal, apparently without much luck as, I suspect, there is an amount of wear on the crankshaft. Does anyone have a recommendation as to the inside diameter of a Speedi Sleeve that might fit the bill?
- 5
- 508
-
Michael A. Smith · updated
-
6A - Engine MechanicalHowdy Everyone, I randomly came across the below video on YouTube and immediately recognized the similar style of oil pump... While the test to show an improvement is hardly scientific, if the different design improves oil flow it could be worth looking into. The lobe design is similar to...
- 4
- 865
-
Autoholic · updated
