[Al Olmo]

After removing the two 17m/m bolts at each side, what is the trick to remove the arm asambly? Thanks. '70 GT

 

[Al Olmo]

I've got the uper arm out, I compress the spring, got the absorber out but now the lower arm won't come out, the "bolt from hell" is out but the arm dose not drop, is there any thing else that need to come out?

 

[Al Olmo]

Ron, the spring is decompress, and the LCA does pivot freely up and down, I was able to remove the bushings at both sides, but it looks to me like there is a sleeve to which the bolts bolt on and that's what's bound in place and it wont let the LCA drop. Nothing is putting pressure on the LCA.

 

[Al Olmo]

Thanks Ron, thats exacly what's holding me up, I just though that it would come out just like the UCA but it takes a little more work. Thank you again.