Opel GT Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
52 Posts
Oil Catch Can

Hey folks-

I ported the the outlet hole by .25 inches when I initially started working the engine over. I then routed the outlet hoses to a vented oil catch can which is mounted just forward of the right side engine mount. The return venting hose is the same diameter and mated on the forward portion of my cold air intake, just aft of the filter.

I have found that my oil pressure has finally stabilized through all RPMs and (!) there has been zero oil return through the intake.

just thought this might help in the whole decision bit. Have a great one!

-Gabe
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top